Velo Orange Hubs

After some very helpful consultation, I ordered H Plus Son Archetypes with White Industry Hubs in with 24/2x and 28/3x lacing of sapim spokes. This is the third wheelset I have had on my Carrera Nitro. The first, Campy Scirocco's, were smooth but the G3 lacing lacked durability, and I blew many spokes. Switched for Reynolds Solitude, which were noisy and also blew spokes. After riding the H Pus Son wheels about 1200 miles, I am confident that these wheels are the best investment I have made on my bike. They are solid, smooth, quiet, and fast. Although I hate the cliche, these wheels have made a huge difference in my cornering, descending, and overall happiness on my bike. I don't race and I am not a tech wheenie--I just ride to be outside and under my own power. I am 5'11'', ride between 200 and 215. This build is bombproof.

I'm still new at wheel building But I learn very quickly and I needed more information on how to properly take Hub measurements to type into the Spoke calculater! So I went to UBI and read how to correctly take measurements and I typed it into their calculater and the difference between theirs and Prowheelbuilers is that Prowheelbuilders was more accurate than UBI's calculater. I did Not know if I should add or subtract to the closest mm: of measurement? So I compared the two different options and Prowheelbuilders Calculater made it easier for me to decide on what length I should go with! if I would have used the length that UBI calculated it would have been a little bit to Short on my Drive side! I figured what the Hell I'll go with prowheelbuilders calculation and it paided off for me! The Spoke Lengths Where Right on the Money!!!. I'm Well Pleased with my New DT Swiss Spokes and they look great as well! I'm using rims with offset spoke holes and I subtracted 1mm from the None drive side and added 1mm To the Drive side like I should and Prowheelbuiders was more accurate! I laced a Novatec D882SB Rear Hub up to a Loaded AmX Gold Anodized Free ride rim with ERD: of 532 and it is running very Smoothly!