Shop By
Cannondale
DT Swiss
ENVE Composites
Hope
Park
Phil Wood
PowerTap
Stan's No Tubes
Surly
Velocity
White Industries
Wheel Accessories
-
$8.25The BSH-4 is a valuable wheel building and truing aid that securely holds bladed spokes to prevent twisting. Four different sized slots to fit a wide variety of bladed spokes. Will hold blades from 0.8mm to over 2mm width. -
$19.00A great time-saver! Neatly designed to self-center and drive conventional nipples quickly and easily during wheel building. Built with a comfortable, dual density grip and lined with precision bronze bearings to ensure a long, smooth running life. The ND-1 works with rims up to 50mm deep. -
$10.00This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. · Has both metric and fractional spoke length markings · For Spokes: Hang the head of the spoke in the oblong hole and read its length on the scale · For Crank Cotters and Ball Bearings: Works just like a gauge for drill bits · Anodized aluminum with embossed markings to allow easy reading and long life -
$7.50Park Tool offers a variety of high quality spoke wrenches that are built to last. · Fits DT and Wheelsmith · Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service · Vinyl coated in one of four colors indicating the size at a glance -
$7.50Park Tool offers a variety of high quality spoke wrenches that are built to last. · Fits older European · Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service · Vinyl coated in one of four colors indicating the size at a glance -
$12.00The SW-11 is a forged double-ended spoke wrench designed to fit select Campagnolo® wheels. Precision machined, plated and vinyl dipped for comfort and long life. -
$12.00The SW-12 is a forged double-ended spoke wrench designed to fit select Mavic® wheels using integrated M7 nipples. Precision machined, plated and vinyl dipped for comfort and long life. -
$12.00Park Tool offers a variety of high quality spoke wrenches that are built to last. · Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings, including the Mavic SSC Ksyrium and Crossmax SLR wheels · The smaller end fits the 6-spline integrated nipples with 5.5mm OD splines, and 7mm thread size nipple · The larger end fits the 6-spline 9mm OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic XM819, EX823 and Speedcity wheels · Will not work on Mavic R-Sys wheels -
$12.00Park Tool offers a variety of high quality spoke wrenches that are built to last. · Comfortable, vinyl dipped, two-sided spoke wrench is designed to fit Shimano Wheel System nipples · Features 4.3mm amd 4.4mm openings -
$15.00Designed to fit internal spoke nipples found on many deep section aero rims. · Built with a comfortable, dual density grip and lined with precision bronze bearings to ensure a long, smooth running life · Works with rims up to 50mm deep · The SW-15 combines 3.2mm square drive and 5mm and 5.5mm hex sockets to fit internal spoke nipples · Works on wheels made by numerous manufacturers, including, but not limited to: FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo and Mavic -
$11.00The SW-16 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle. -
$11.00The SW-16.3 offers an extra long reach (3.25" / 8.25cm) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle. -
$11.00The SW-17 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle. -
$11.00The SW-18 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle. -
$11.00The SW-19 offers an extra long reach (3.25"/ 8.25cm) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle. -
$8.00Park Tool offers a variety of high quality spoke wrenches that are built to last. · Fits older Japanese · Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service · Vinyl coated in one of four colors indicating the size at a glance -
$9.50Park Tool offers a variety of high quality spoke wrenches that are built to last. · 105 Gauge · Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service · Vinyl coated in one of four colors indicating the size at a glance · No hanger card -
$8.00Park Tool offers a variety of high quality spoke wrenches that are built to last. · Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples -
$8.00Park Tool offers a variety of high quality spoke wrenches that are built to last. · Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples -
$8.00Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of five colors indicating the size at a glance. -
$95.70The Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. · Perfect for building or truing wheels, diagnosing wheel problems, or assembling new bikes · Works on nearly any bicycle spoke no matter what the diameter, material, or shape · Easy to use and priced affordably -
$55.00Park TS-2 EXT.2 Truing Stand Upright Extensions install in seconds on any TS-2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), · Allows the Park TS-2.2 truing stand to accommodate hubs up to 200mm · Allows the Park TS-2 truing stand to accommodate hubs up to 170mm · Allows the Park TS-2 truing stand to accommodate 29" wheels with tires installed when combined with #238K caliper upgrade kit QBP part # TL8603 · Specially sized bosses allow the TS-2.2 and TS-2 truing stands to work with 12, 15,20 and 25mm thru axle hubs with removable axles -
$19.00Allows truing stand to be used with 12mm, 15mm, 20mm, and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2 or TS-2. -
$60.00The TS-TA makes it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale® Lefty™ wheels. The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs. -
$61.95For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished.” To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must. An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
